Select your desired installation point. The Easy Tee Junction can be installed on vertical and horizontal pipes.
Use primer to clean the pipe around your chosen installation point and to clean the inside of your Easy Tee “Snap on cradle” and branch/offtake socket.
Apply solvent weld glue to the inside of your Easy Tee “Snap on cradle” and to the pipe of your installation point, push the cradle over the pipe and hold in position for a minimum of 60 seconds or until secure.
Allow the solvent weld glue to dry.
Using the appropriately sized hole saw and drill (86mm for 90mm and 102mm for 100mm) cut a hole in the pipe through the branch/offtake socket of your Easy Tee Junction and install your 90mm or 100mm branch/offtake pipe.