Leaf Eater Commercial

THE NEXT GENERATION COMMERCIAL RAIN HEADS

Commercial screened Rain Heads (150mm & 225mm) prevent leaves and debris from blocking downpipes and entering your rainwater tank. Rain Heads are ideal for fitting to each downpipe as they protect the building and improve your tanks water quality.

Features and Benefits

• High flow rate performance to match commercial requirements
• Patented single screen technology for advanced debris shedding (Clean Shield™)
• Minimal maintenance
• Superior catchment efficiency
• A single mosquito proof stainless steel mesh screen with 0.955mm aperture
• Available in Stainless Steel, ZINCALUME^® or any of the 20 standard COLORBOND^® colours

Installation Instructions

1.  Select a location for the Rain Head. A Rain Head installed at a height
     of 2.6 metres will prevent tampering while providing convenient
     access for maintenance.
2.  Cut and bracket the bottom pipe to the wall. Offset the pipe 30mm
     from the wall.
3.  Install the Rain Head into the pipe and mark the side flange fastening
     holes. Remove the Rain Head and prepare the necessary fastening
     points. Fasten the Rain Head to the wall ensuring that it is adequately
     supported by the wall structure.
4.  Install pipe above the Rain Head with an offset of 30mm from the wall.
      – Cut the outlet of the pipe at an angle of 30 degrees to match the
         angle of the screen.
      – Position the angled pipe 50mm above the stainless steel screen.

COLORBOND^® and ZINCALUME^® are registered trademarks of BlueScope Steel Limited.