Downpipe First Flush Diverters

First Flush Water Diverters

logo-downpipe-water-diverter

Description Code
Downpipe First Flush
Water Diverters*
90mm WDDP01
100mm WDDP02
150mm WDDP03

*Available at an extra cost:

  1. Optional Stainless Steel Primary Screen
    (Product Code: WDAC02);
  2. 90mm Plastic Pipe Bracket set
    • ideal for under eaves
      installations
      (Product Code: WDAC10).

Downpipe First Flush Water Diverters improve water quality and reduce tank maintenance by preventing the first flush of water, which may contain roof contaminants, from entering the tank. They help ensure cleaner water is  available for use, which protects rainwater pumps and internal household appliances such as clothes washing machines, toilets, hot water systems, etc.

Downpipe First Flush Diverters, such as the 90mm, 100mm and 150mm kits, are installed at each downpipe that supplies water to the tank. They utilise a dependable ball and seat system – a simple automatic system that does not  rely on mechanical parts or manual intervention. As the water level rises in the diverter chamber, the ball floats, and once the chamber is full, the ball rests on a seat inside the diverter chamber preventing any further water entering the diverter. The subsequent flow of water is then automatically directed along the pipe system to the tank.

Features and Benefits

  • Prevents sediment, bird droppings, spiders, insects, mosquito eggs and debris from entering the rainwater tank.
  • Improves water quality, protects pumps and internal appliances.
  • Ideal to use in conjunction with a rain head.
  • Easy installation, just add pipe and glue.
  • No mechanical parts.
  • Low maintenance requirements.

  

  

How do they work?

Fitting an appropriately sized First Flush Water Diverter is critical to achieve good quality water. Water Diverters improve water quality, reduce tank maintenance and protect pumps by preventing the first flush of water, which may contain contaminants from the roof, from entering the tank.

When it rains, water slowly builds up in the roof guttering system before it exits through the downpipe. The first flush of water from the roof can contain amounts of bacteria from decomposed insects, skinks, bird and animal droppings and concentrated tannic acid. It may also contain sediments, water borne heavy metals and chemical residues, all of which are undesirable elements to have in a water storage system.

Water-Diverters-01-high-res1

Instead of flowing to the water tank, these pollutants are diverted with the initial flow of water into the chamber of the water diverter. The water diverters from Rain Harvesting utilise a dependable ball and seat system – a simple automatic system that does not rely on mechanical parts or manual intervention.

As the water level rises in the diverter chamber the ball floats, and once the chamber is full, the ball rests on a seat inside the diverter chamber preventing any further water entering the diverter. The subsequent flow of water is then automatically directed along the pipe system to the tank.

For a water diverter to work effectively, the contaminated water in the chamber must be sealed off. This prevents the water passing to the storage tank and ensure the water does not “syphon” off the contaminated water in the chamber. The simplest and surest way to do this is with a floating ball and seat.

A slow release valve ensures the chamber empties itself after rain and resets automatically. The diverted water need not be wasted water because the drain pipe from the diverter chamber can be fitted to a standard drip irrigation system.

ffwd_slow_release

How much water to divert

It is important to prevent heavy sediments and other roof pollutants from entering the rainwater tank. The amount of water diverted should be a minimum of 20 litres per 100 square metres of roof area (or 0.2L per m2). In calculating the amount of water to divert, consideration can be given to (1) the surface area of the roof, and (2) theamount of pollutants on the roof and gutters.

The following factors can be used as a guide in determining the volume of water to be diverted.

how_much_water_to_divert

As a rule of thumb, the more water that is diverted the better the quality of water in the tank.

Installation Instructions

1.  Determine the length of Diverter Chamber #4. Consider as a guide
that each:
– 1m of 90mm pipe holds approx. 5.9L of water.
– 1m of 100mm pipe holds approx. 8.8L of water.
Fit the longest length of pipe possible, making sure the Screw Cap
#10 is at least 150mm from the ground to allow for removal and
cleaning.
2.  Place the ball Seat #9 into the Tee Junction #6 ensuring the narrow
end of the ball seat points down into the Diverter Chamber #4. Apply
glue to the Diverter Chamber #4 and fit up against the Ball Seat #9
and hold until the glue sets. (Optional: Use a 45º bend adaptor to
allow easier removal of the Screw Cap #10). Glue the Socket #14 to
the bottom end of the Diverter Chamber #4.
3.  Fix the assembled chamber directly to the wall in the desired position
using the Wall Brackets. Note: Optional 90mm Plastic Pipe Bracket set
(Product Code: WDAC10) available for under eaves installation.
4.  Connect a Male & Female (M&F) Elbow #8b (if required) to the
Chamber Outlet #8 and connect the downpipe #3. Fit an elbow to the
InFeed pipe #2 (if required) and connect to the bottom of the selected
rain head.
5.  Select the appropriate Flow Control Valve #11 and insert into the
Hose Connector #16, making sure the valve is inserted with the side
marked “TOP” still showing. Start by using the Control Washer with
the smallest gauge hole(lowest number). Try a larger gauge Washer if
experiencing blockages. Place the Filter Screen #13 into position from
the outside of the Screw Cap #10 and then attach the Hose
Connector #16.
An extra filter screen that helps stop the Control Valve blocking is
available from your local store. Ask for the “Optional Stainless Steel
Primary Screen” (Product Code: WDAC02). This filter is fitted in
addition to the Plastic Filter Screen #13. To install: After completing
step 5, insert the Keeper Ring #1a into the Screen Cap #10 and then
place the Optional Stainless Steel Primary Screen on top of the Keeper
Ring #1a. Proceed to step 6.
6.  Place the Sealing Ball #5 into the Diverter Chamber #4 and attach the
assembled Screw Cap #10 to the Socket #14.

Downpipe-Diverter-Inst-image